Welcome to your H&S and Regulations Exam. When you are ready, please press "start quiz".
1.
Which of the following statements is incorrect?
2.
The maximum length of a flexible cord or cable for a caravan connection is?
3.
When making an assessment of the frequency and quality of maintenance, a factor to be considered is that:
5.
Which specific location would not be included in the scope of BS7671?
6.
Square or rectangular green signs with a white symbol are called?
7.
An approximation of the prospective fault current between line conductors, of a 3 phase supply can be determined by?
8.
Where a 3-core cable, with cores coloured brown, black and grey, is used as a switch wire for two-way or intermediate control. The terminations of the conductors shall be identified using?
9.
Which falls under the scope of BS7671?
10.
Which of the following is classed as notifiable work under Part P of the building regulations?
11.
What type of fire hazard would this extinguisher be used on?
12.
In a swimming pool or other basin, the metallic covering or sheath of a wiring system in zones 0,1 or 2 shall?
13.
What value of Prospective Fault Current would the Distributor Network Operator state for a dwelling with a TN-S earthing system, outside of London?
14.
Which Classification does this symbol identify?
15.
What should be made part of a PEI design to help combine information or data from or to the DNO, Electricity supplier and user?
16.
A protective conductor connecting exposed conductive parts of equipment to the main earth terminal is a?
18.
Triangular yellow safety signs with a black border and symbol are called?
19.
What does the letter T stand for in TNCS?
20.
What is the distance, for how far away cables must be from gas pipework, according to the building regulations?
21.
Which part of the building regulations cover the Fire Safety of a building?
22.
An accident occurs, the cause of which is found to be a piece of faulty equipment. The action to be taken would be?
23.
The minimum information contained on a periodic inspection and testing notice would be the?
24.
So that people with limited reach can access consumer unit protective devices in a domestic dwelling, what height are they required to be above floor level?
25.
Which of these is not is not suitable for a SELV system?
26.
External influences coded BA are classified as?
27.
Which one of the following describes the purpose of supplementary bonding between exposed extraneous parts
28.
The ambient air temperature rating factor for 90ºC thermosetting cables operating in an ambient air temperature of 60ºC is?
29.
20A final circuit is the wiring between?
30.
In a location containing a bath or shower supplementary bonding may be omitted, amongst other conditions, where?
